Written quote within one business day, across Toronto and the GTA
System only $8-$15 per sq ft Bundled with tile $22-$40 Mat in 1 day Licensed electrician connects

Heated floor installation in Toronto

Electric heated floors in Toronto with Toronto Flooring Co run $8 to $15 per sq ft of heated area for the system alone, or $22 to $40 per sq ft bundled with tile. The mat goes down in a day and the tile follows over the next 2 to 3 days. A licensed electrician makes the connection, and we draw the heated area around your fixtures before quoting.

Heated area drawn around cabinets, vanities, toilets and tubs
The price basis stated on the quote: system only or bundled
Thermostat and dedicated circuit listed as their own lines

Price a heated floor

Room, rough dimensions, and what is fixed in place: vanity, tub, toilet, island. That is what sets the heated area.

What can we help with?

So the right crew reviews your project.

Any workmanship warranty is set out in your written quote, job by job.

The measurement that matters

How much of the room gets heated?

Electric floor heating goes under the open floor only. It does not run under a vanity, under kitchen cabinets, under a toilet flange or under a tub, because trapping cable beneath a fixed object is both wasteful and a way to cook the element. That means the heated area of a real bathroom or kitchen commonly lands somewhere around sixty to eighty percent of the room’s footprint. A five by eight bathroom is forty square feet on paper, and after the vanity, the toilet and the tub surround it may be closer to twenty five. Quote the forty and the number is wrong by more than a third. It is a common budgeting mistake on a heated floor, and it is avoidable: we draw the layout, subtract the fixtures, and price the mat off what is left.

What a heated floor quote should list

A drawn heated area

Not the room size. A layout showing the mat or cable run with the vanity, toilet, tub and cabinet runs drawn out of it, with the resulting heated square footage stated as a number you can check against the product you are being sold.

Thermostat and circuit as separate lines

A floor heating thermostat and the dedicated circuit it needs are not part of a per square foot floor rate. They are their own items, they are quoted by the electrician, and a quote that does not show them has not finished pricing the job.

The finish floor that sits on it

Porcelain tile is the usual partner. Whether the tile sits inside the heated floor number or beside it is the difference between the two price bases below, so the quote says which one you are looking at.

Heated floor pricing in Toronto

Toronto and GTA ranges collected September 2026, from single sources rather than a consensus, so treat them as indicative. The two rows below are different scopes, not competing prices for the same thing.

Heating system only

$8-$15 / sq ft

  • Mat or cable material $5-$10 per sq ft
  • Installation labour $3-$5 per sq ft
  • Priced over the heated area, not the room
  • Finish floor and electrical quoted separately
Price the system

Bundled with the floor

$22-$40 / sq ft

  • Heating system, finish floor and electrical together
  • Usually quoted with porcelain tile on top
  • One contract, one schedule, one walkthrough
  • Still priced off the measured heated area
Get the bundled scope

Preparation and extras

Quoted per job

  • Old floor removal and disposal $1-$3 per sq ft
  • Tile removal around $4 per sq ft
  • Floor leveling $2-$4 per sq ft where the deck needs it
  • Thermostat and dedicated circuit priced by the electrician
Ask what yours needs
Our Process

How a heated floor job runs

1

Draw the heated area

Room measured, fixtures marked, mat layout drawn around them. You get a heated square footage before you get a price, and the two are shown together.

2

Confirm the electrical

The licensed electrician confirms panel capacity and the dedicated circuit, and quotes the thermostat and connection. We do not price electrical work we are not licensed to do.

3

Prepare and lay the element

Old covering out, deck cleaned and brought into flatness tolerance, mat or cable set out to the drawing, sensor placed between runs, and resistance tested before anything covers it.

4

Tile, connect and commission

Thinset and tile go over the element, the electrician makes the connection, then the system is tested and the thermostat set up with you standing there.

What we confirm before ordering a mat

Three checks that stop a heated floor becoming an argument.

Who is doing the electrical

We set out the element, place the sensor between cable runs, tile over it and commission the system with you. The connection to the panel, the dedicated circuit and the thermostat wiring are a licensed electrician's work. Ontario does not licence flooring contractors, and that is not permission to do work that needs a licence in another trade. The electrician's scope and number appear on your quote as their own lines, so you know who is responsible for which half.

Whether the element gets tested before it is buried

Resistance is checked when the mat comes out of the box, again once it is laid, and again before tile goes over it. A break found under thinset is a demolition job. A break found on the roll is a warranty exchange.

What the building allows if you are in a condo

A heated floor in a tower is still a hard surface floor going into a unit with rules attached. Boards commonly want product data sheets, an underlayment specification, a certificate of insurance and a WSIB clearance before they approve, and rules take effect thirty days after notice to owners, so the version in your old status certificate may not be current. We pull the current rules before anything is ordered.

Which heated floor price are you being quoted?

There are two numbers circulating for heated floors in this city and they describe different jobs. The first is the heating system alone at roughly $8 to $15 per square foot, which breaks down into about $5 to $10 for the mat or cable and $3 to $5 for the labour to set it out. The second is $22 to $40 per square foot for the heating system bundled with the finish floor and the electrical work.

Neither is wrong. The gap is scope, and it is mostly tile. Porcelain supplied and installed in Toronto runs $10 to $20 per square foot on its own, so a bundle that carries tile plus an electrician’s connection plus the mat lands where it lands.

Both figures come from single sources rather than a broad consensus, which is why we treat them as indicative and quote your actual job rather than reading off a rate card. What we will always do is state which basis a number sits on, because comparing an eight dollar quote against a thirty dollar quote without that context is how people conclude one contractor is gouging them.

Wide-plank wood-look flooring in a Richmond Hill front hallway meeting existing stone tile

Which rooms should get a heated floor?

Bathrooms first. The floor is tile, tile is cold, the room is small, and the heated area after fixtures is small enough that the total stays modest. This is the job that makes people glad they did it.

Kitchens second, with a caveat: subtract the island and the perimeter cabinet runs and the heated area shrinks a long way. It still works, but the ratio of thermostat and circuit cost to heated square footage gets worse as the room gets more built in.

Basements third, and here the slab matters more than the mat. A below-grade slab needs to be tested and, depending on the assembly, insulated, or a good share of the heat goes down into the ground instead of up into the room. That is a conversation we would rather have before the mat is ordered.

Entryways and mudrooms are the quiet one. A heated tile floor at the door in a Toronto February dries boots and melts the salt slush that otherwise sits against your hardwood transition all winter.

Heated floor questions

Why is my heated floor quote based on less area than my room?

Because the mat only goes where the floor is open. Cabinets, vanities, the toilet footprint and the tub all come out of the heated area. That is not a contractor shaving the scope, it is how electric floor heating is installed, and it means a quote priced on room area is priced on more product than will fit.

Does the heated floor go under the tile or under the subfloor?

Under the tile. The element sits on the prepared deck and the thinset and tile go directly over it, which puts the heat close to the surface so the floor responds in a reasonable time. The deck has to be flat and sound before the mat goes down, because anything you can feel through the tile is then permanent. Where the deck needs leveling first, it is quoted as its own line.

Can a heated floor be the only heat in the room?

Treat it as comfort heat and size the rest of the system accordingly. Toronto has a long heating season, about 4,066 heating degree days below 18 C at Pearson (1981-2010 normals), and an electric floor mat sized to a bathroom is not designed against that load. We will not promise you can turn off a radiator, and any contractor who does should be asked to show the heat loss calculation behind it.

Get a heated floor priced off the real heated area

Send the room dimensions and a note of what is fixed in place. We will come back with a drawn layout and a square footage before we quote anything.

Back to top