Written quote within one business day, across Toronto and the GTA
Refinish $3.50-$9 per sq ft Install $9-$18 per sq ft 1,000 sq ft in 3-5 days Free measure

Flooring installation in Leaside

Flooring installation in Leaside with Toronto Flooring Co runs $9 to $18 per sq ft for solid hardwood, $8 to $16 for engineered, $5 to $11 for vinyl plank and $3 to $8 for laminate, supplied and installed, with no travel premium. A 1,000 sq ft main floor takes 3 to 5 days of labour. Much of Leaside was built between 1927 and 1941 with oak floors worth keeping, so we price refinishing first, at $3.50 to $9 per sq ft for a sand and three coats. The measure is free and your written quote arrives within one business day.

Refinish quoted before replacement is discussed
Existing floor inspected, not assumed
Room widths measured for wide plank
A sealer and two topcoats on every refinish

Get a Leaside refinish quote

Your street, the approximate square footage and what the current floor looks like.

What can we help with?

So the right crew reviews your project.

Any workmanship warranty is set out in your written quote, job by job.

Installer fitting a custom dark inlay border into a solid oak floor in a Leaside home
Custom border inlay

Recent Project in Leaside

Our installer hand-fitting a custom border into a solid oak floor in Leaside. The border follows the wall with a dark inlay strip framed by lighter liners, and the field boards are cut and fitted to it one by one over the plywood subfloor.

Request a quote
Where we work

Laird to Bayview, all of Leaside

We work all of Leaside, from the Laird Drive commercial strip across to Bayview Avenue, and north of Eglinton where the later build-out runs. Because most of the houses here went up within a short window, the survey is shorter than in a borough with four construction eras: we confirm the expected assembly and look for the exceptions, such as a rebuilt kitchen, a finished basement, water damage under a bay window or a later addition that behaves differently from the rest of the house.

What a Leaside quote answers

Whether the existing floor can be sanded

Thickness above the tongue, previous sands, cupping, water damage and any boards that have to come out. That inspection decides whether you are buying a refinish at three dollars fifty to nine per square foot or a replacement at several times that.

Both paths on one page

A refinish number and a replacement number side by side. Refinishing scales with area, so a small room costs more per square foot than a whole floor; the per-size rates are in the questions below.

Whether wide plank fits the room

Leaside rooms are wider than the narrow downtown lots, which makes wide plank a genuine option here, so long as the humidity plan comes with it.

Our Process

How a Leaside floor is quoted

1

Inspect what is already there

Lift a vent cover and a closet corner, check the wear layer left above the tongue, and look for water damage, cupping and previous sanding. This is the step that decides the whole project.

2

Price both paths

A refinish number and a replacement number on the same page, so you can see what you are choosing between instead of being steered towards the larger invoice.

3

Plan the disruption

Sanding is dust and fumes, and the cure time matters more than the dry-to-touch time. We put the manufacturer's cure number on the quote and say it again at handover.

4

Do the work and walk it

Sand, seal, two topcoats, or lift and install where replacement is the answer, then a walkthrough against the signed scope.

What we check before recommending a sand

Four things that decide whether refinishing is the right call in a Leaside house.

How much wood is left

A floor can only be sanded so many times before the fasteners are in range. We measure what is above the tongue at a doorway or a vent cut rather than estimating from the room. If there is not enough left, we say so and price replacement instead.

What the boards are made of

We do not assume a floor of this era is oak strip, and we do not assume it is original. We look at the board width, the joint and the grain, and we tell you what we see. A softwood floor takes a sand very differently from a hardwood one.

Whether the coating count is realistic

We apply a sealer and two topcoats. Sanding runs two dollars fifty to four per square foot, staining seventy-five cents to a dollar fifty, and polyurethane a dollar fifty to three fifty. A quote far below those is usually buying fewer coats.

Whether dustless is worth it to you

Dustless sanding carries a premium of roughly twenty-five to forty percent. In an occupied house it often earns that back. In an empty one before a move-in it may not, and we would rather you decided than defaulted.

Refinish or replace in Leaside

Why we look at refinishing first

In a neighbourhood where many houses still have their original floors, the existing floor is worth inspecting seriously. We will not tell you that your floor is original oak and worth saving until we have looked at it. What we will do is look before quoting a replacement.

The numbers make the case for checking. A sand and three coats is three dollars fifty to nine per square foot, against nine to eighteen for solid hardwood supplied and installed. Even where some boards have to come out, board replacement inside a refinish runs eight to fifteen dollars per square foot, far below the cost of taking up a whole floor.

Wide plank needs a humidity plan

Board width is not only a taste question. A wide plank needs room width to look right and needs humidity control to stay flat, since a wider board carries more seasonal movement in every joint.

The National Wood Flooring Association target is thirty to fifty percent relative humidity, and Toronto runs its furnace across about 4,066 heating degree days below 18 C a year at Pearson (1981-2010 normals). If you want five inch boards in a Leaside living room, they will fit the room. The humidifier comes with them.

Leaside flooring questions

My Leaside house is from the 1930s. Do you know what is under the floor?

We know what to expect and we still look. A 1930s house sits in the middle of Leaside's main build-out and shares its construction period with most of its street, so we know which assemblies of that era to check and roughly what joist spacing and deck construction to expect. It does not let us skip the check, because a guess is what makes a quote change on day two.

What does a sand and three coats cost in a Leaside house?

Three dollars fifty to nine per square foot, and where you land inside that depends mostly on area. The pricing scales inversely: a small 150 square foot room runs eight to twelve dollars per square foot because the setup cost is spread across very little floor, 250 square feet runs six to eight, 600 runs five fifty to six fifty and 1,000 runs five to six. For a typical detached house at 1,200 to 2,000 square feet, project totals land between thirty-six hundred and twelve thousand dollars. Staining, premium water-based finishes and dustless sanding each carry their own premium and appear as separate lines.

Are pre-1927 Leaside houses different?

Yes, and there are not many of them. A small number of Leaside houses predate the main build-out that followed the Leaside Viaduct in 1927, so they sit in a different construction period from the streets around them. If your house is older than that, we treat it as its own survey rather than assuming the neighbourhood pattern, which mainly means more time on the joist bays and the wiring in them.

Can I have wide plank in a Leaside living room?

Yes, more comfortably than in most of old Toronto, with one condition attached. Leaside rooms have a width that a narrow Victorian lot downtown does not. The condition is humidity. A five inch red oak plank moves roughly nine hundredths of an inch across a thirty percent relative humidity swing, so ten boards across a room add up to about nine tenths of an inch. Toronto swings well past thirty percent between February and August. Wide plank here means a humidifier and a target of thirty to fifty percent relative humidity, and we would rather say that now than explain a gap in winter.

Get a Leaside refinish quote

We price the sand and the replacement on the same page so you can choose, rather than being sold the bigger one.

Back to top